carbonsteelfabrication
Carbon Steel Fabricators

Comprehensive Steel Fabrication Capabilities

WEC Fabrication is equipped with state-of-the-art facilities, including craneage up to 30 tonnes and an extensive range of modern fabrication equipment, to handle the most demanding steel fabrication projects. From small brackets to heavy plate work, no order is too big or too small. With a team of over 200 skilled welders, we offer a full spectrum of coded welding services including TIG, MIG, and ARC, alongside robotic welding, sheet metalwork, large machining, and heavy engineering services. WEC Fabrication is ideally placed to cater for a diverse customer base, accommodating the needs of niche industries such as Rail, Defence, Marine & Subsea, Nuclear, Aerospace, and Oil & Gas.

Mild Steel Fabricators

Powder Coating and Painting Services

Carbon steel or mild steel components require a protective finish such as painting, galvanising, or powder coating to prevent corrosion and enhance durability. At WEC Fabrication, our state-of-the-art powder coating plant can handle components up to 1.5m high, 3m long, and 800mm wide, featuring the latest automation technology that makes us highly competitive for large batch and volume orders. With two automatic reciprocators, a 90% powder recovery system, and a four-stage in-line pre-treatment plant, our process is both cost-effective and environmentally friendly. We also provide shot blasting and wet painting services for components up to 15m long, 6m wide, and 4m high, offering a wide range of standard RAL colours to suit every requirement.

Learn More
powder coating green
MILD STEEL FABRICATION

Material Grades

These are the other material grades we offer for mild steel fabrication.

S275

A strong and reliable mild steel often used for structural work like frames and supports.

S355

A tougher, higher-strength mild steel used where extra durability and load-bearing capacity are needed.

S355JR

A version of S355 designed to handle normal working conditions and temperatures.

S355J2

Similar to S355JR but made to perform well in colder environments without becoming brittle.

S355MC

A high-strength mild steel that’s great for forming and bending, often used in automotive and heavy equipment parts.

Steel Fabricator

Expert Carbon Steel Fabrication

We also work with a wide range of materials including:

Case Studies

Explore our recent Carbon steel Fabrication projects which showcase our diverse range of capabilities and expert skills:

Blast Baskets for Aero Engine Test Beds

Project: Blast Baskets for Aero Engine Test Beds
Client: Rolls Royce
Location: Derby, East Kilbride, Cardiff

WEC Group has fabricated and installed multiple Test Beds for various organisations such as Rolls Royce (Test Bed 54 and 80), General Electrics based in Wales and BAE Systems in Scotland.
One of our most recent projects is a 17m long x 6.5m diameter blast basket for the worlds largest indoor engine test bed facility at Rolls Royce, Derby.

The testbed will support engines such as Trent XWB and Trent 100 and will also be able to facilitate the UltraFan, which is Rolls Royce’s engine for the next generation of aircraft.

Read More

Silence Control Exhaust Stack Fabrication

Sector: Energy
Project: Silence Control Exhaust Stack
Location: Aberdeen

WEC Fabrication successfully completed the manufacture of a high-specification Silence Control Exhaust Stack for a key customer in the energy sector. Designed and fabricated to meet exacting requirements, this complex structure was delivered within a strict 16-week lead time, ensuring it was installed on schedule during a planned site shutdown in Aberdeen. Constructed from a combination of 321-grade perforated stainless steel and carbon steel, the exhaust stack was built to withstand high temperatures and demanding environmental conditions. The structure comprised 10 separate fabrications, each measuring approximately 4.2 metres wide and weighing over 5 tonnes. Once fully assembled, the stack was meticulously insulated with glass fibre to enhance thermal efficiency and noise reduction.

Read More

Ground Support Platforms and Wing Trolley


Project: Ground Support Platforms and Wing Trolley
Client: Airbus Hamburg

Our specialist Aerospace division manufactured and supplied 42 different ground support platforms to be used during the various build stages of Airbus A320 Aircrafts in Hamburg. This multi-million-pound project was manufactured in the UK over 18 months and then installed in Germany by our specialist steel erection team. The platforms were manufactured in Mild Steel and painted white. These were then delivered and installed in Hamburg by our expert team.

Read More

Royal Mail Post Boxes and Parcel Boxes

Client: Royal Mail
Project: Royal Mail Post Boxes and Parcel Boxes

In 2020, WEC Group, a leading contract manufacturing specialist based in Darwen, secured a prestigious multi-million-pound contract with Royal Mail. From July 1st of that year, WEC Group began manufacturing all Royal Mail’s iconic red post boxes and associated metal products, items deeply embedded in British heritage. The Royal Mail contract required WEC Group to produce a wide range of fabricated products, including post boxes, parcel drop boxes, sorting stations, and mail trolleys. The scope of work was well aligned with the company’s in-house capabilities, which encompass laser cutting, fabrication, precision machining, and specialist coatings. Adrian Radcliffe, Fabrication Operations Manager, credited the win to WEC’s longstanding reputation for quality, reliability, and the ability to deliver complex projects on time and within budget.

Read More

Blast Baskets for Aero Engine Test Beds

Project: Blast Baskets for Aero Engine Test Beds
Client: Rolls Royce
Location: Derby, East Kilbride, Cardiff

WEC Group has fabricated and installed multiple Test Beds for various organisations such as Rolls Royce (Test Bed 54 and 80), General Electrics based in Wales and BAE Systems in Scotland.
One of our most recent projects is a 17m long x 6.5m diameter blast basket for the worlds largest indoor engine test bed facility at Rolls Royce, Derby.

The testbed will support engines such as Trent XWB and Trent 100 and will also be able to facilitate the UltraFan, which is Rolls Royce’s engine for the next generation of aircraft.

Read More

Silence Control Exhaust Stack Fabrication

Sector: Energy
Project: Silence Control Exhaust Stack
Location: Aberdeen

WEC Fabrication successfully completed the manufacture of a high-specification Silence Control Exhaust Stack for a key customer in the energy sector. Designed and fabricated to meet exacting requirements, this complex structure was delivered within a strict 16-week lead time, ensuring it was installed on schedule during a planned site shutdown in Aberdeen. Constructed from a combination of 321-grade perforated stainless steel and carbon steel, the exhaust stack was built to withstand high temperatures and demanding environmental conditions. The structure comprised 10 separate fabrications, each measuring approximately 4.2 metres wide and weighing over 5 tonnes. Once fully assembled, the stack was meticulously insulated with glass fibre to enhance thermal efficiency and noise reduction.

Read More

Ground Support Platforms and Wing Trolley


Project: Ground Support Platforms and Wing Trolley
Client: Airbus Hamburg

Our specialist Aerospace division manufactured and supplied 42 different ground support platforms to be used during the various build stages of Airbus A320 Aircrafts in Hamburg. This multi-million-pound project was manufactured in the UK over 18 months and then installed in Germany by our specialist steel erection team. The platforms were manufactured in Mild Steel and painted white. These were then delivered and installed in Hamburg by our expert team.

Read More

Royal Mail Post Boxes and Parcel Boxes

Client: Royal Mail
Project: Royal Mail Post Boxes and Parcel Boxes

In 2020, WEC Group, a leading contract manufacturing specialist based in Darwen, secured a prestigious multi-million-pound contract with Royal Mail. From July 1st of that year, WEC Group began manufacturing all Royal Mail’s iconic red post boxes and associated metal products, items deeply embedded in British heritage. The Royal Mail contract required WEC Group to produce a wide range of fabricated products, including post boxes, parcel drop boxes, sorting stations, and mail trolleys. The scope of work was well aligned with the company’s in-house capabilities, which encompass laser cutting, fabrication, precision machining, and specialist coatings. Adrian Radcliffe, Fabrication Operations Manager, credited the win to WEC’s longstanding reputation for quality, reliability, and the ability to deliver complex projects on time and within budget.

Read More
See More Case Studies
Steel Fabrication

Unwavering Commitment to Quality

Quality is at the core of every steel fabrication project at WEC Fabrication. We are certified to ISO 9001:2015, CE Marking BS/EN 1090-1, and ISO 3834, ensuring our processes and products meet the most rigorous industry benchmarks. Our team works to ASME and BS EN standards, with welders fully qualified in MIG, TIG, MMA, sub-merged, and arc coded welding across all disciplines, with assessments carried out by PED assessment bodies. This dedication ensures the highest quality results, consistently delivering reliable and robust steel fabrications.

Quality Assurance
MILD STEEL FABRICATOR

Why choose us?

With over 45 years of experience in mild and carbon steel fabrication and 200+ coded welders trained by CSWIP instructors, WEC Fabrication has built a reputation for quality, reliability, and precision. Our extensive expertise allows us to take on projects of any size or complexity. This includes one-off fabrications to large-scale production runs. We combine skilled craftsmanship with advanced technology to deliver exceptional results every time. Customers choose us for our proven track record, attention to detail, and commitment to delivering on time and to the highest standards.

Contact Us
Steel fabricator

Reliable Fabrication with
On-Time Delivery Across the UK

At WEC Fabrication, we pride ourselves on delivering carbon steel projects on time without compromising quality. Our efficient production processes, skilled workforce of 1,100 employees, and advanced machinery allow us to achieve fast turnaround times, even on complex or large-scale projects. We understand the importance of meeting tight deadlines and work closely with customers to keep every stage of production on schedule. This commitment to reliability and speed ensures our clients can plan with confidence, knowing their projects will be completed when promised.

Contact Us Today
large-fabrication-delivery (1).1
large-fabrication-delivery (3)
large-fabrication-delivery (6)
large-fabrication-delivery (8)
large-fabrication-delivery (11)
Steel Fabrication

Why choose WEC Fabrication?

Choosing WEC Fabrication means partnering with a company that combines four decades of specialised experience with cutting-edge technology and a highly skilled workforce. We place a strong emphasis on customer service, with our team working closely with you from initial enquiry through to finished installation or assembly, ensuring the fabricated product precisely meets your requirements. Our diverse material capabilities, extensive welding expertise, and certifications make WEC Fabrication the ideal partner for high-quality, complex steel fabrication and heavy engineering projects.

Contact Us
Steel Fabrication Company

Companies we support

We proudly work with some of the best names in the industry, providing second-to-none quality to our trusted customers in a variety of sectors across the globe.

Carbon Steel Fabrication

Steel Fabrication in a variety of sectors

WEC Fabrication are industry experts in a wide range of industries, including Offshore, Oil & Gas, Food Processing, Nuclear, and Chemical.

Food Processing

Architectural Fabrication

Nuclear Fabrication